LAB GRUPPEN 1 Channel Amplifier CA1201

CA1201

The CA1201 120-Watt Commercial Amplifier provides the perfect solution for commercial and industrial applications requiring great sounding distributed audio coupled with power conservation and reduced operating expense. Capable of delivering high-quality sound over both Low-Z (4/8 Ohm) and High-Z (70/100 V) loudspeaker configurations offering extreme flexibility on every channel. The CA1201 is easy to install and operate – even for non-technical personnel. Simply put, the CA1201 is ideal-suited for bars & restaurants, retail destinations, hotels, corporate, education or other venues needing background music and/or a public address system.

120 Watt Commercial Amplifier with Energy Star Certification

• 120 Watt amplifier for commercial and industrial applications
• Low-Z (4/8 Ohm) and High-Z (70/100 V) operation with switchable high-pass filter
• Energy Star* certified design conserves energy and drastically reduces operational cost
• Direct drive, constant power technology for superior audio performance and reliability
• GPI remote volume control using standard RJ-45 connector and Ethernet cable
• Individual front panel master volume and bass/treble controls
• Auto Ramp circuitry for quiet and fast power up/down enables real-world energy savings
• Front panel power control button for direct access
• Rack-mountable 1U, half-rack width enclosure with joining brackets for rack, table and wall mounting
• Euroblock type amplifier input and output connectors
• Convection-cooled, fan-less amplifier technology for low noise
• 10-Year Warranty Program*
• Designed and engineered in Sweden

Technical Specifications

Maximum Output Power

• 4 Ω per channel 120 W
• 8 Ω per channel 120 W
• 70 V per channel 120 W
• 100 V per channel 120 W

Number of Ouput Channels

• Number 1

Minimum Load Impedance

• 4 Ω mode 4 Ω
• 8 Ω mode 8 Ω
• 70 V output mode 41 Ω
• 100 V output mode 82 Ω

Limiter Voltage / Amp Gain

• 4 Ω mode 31 Vpeak / 25 dB
• 8 Ω mode 44 Vpeak / 28 dB
• 70 V output mode 100 Vpeak / 35 dB
• 100 V output mode 141 Vpeak / 38 dB

Controls

• Front Power standby button, gain control,
• tone controls - bass and treble
• Rear Load config - (4 Ω / 8 Ω / 70 V / 100 V),
• switchable 80 Hz high-pass filter

Tone Controls

• Bass ±10 dB @ 100 Hz
• Treble ±10 dB @ 10 kHz

Indicators

• Power On (blue), force standby (red),
• sleep (yellow)

Master

• Signal (green LED) >12.3 mV (-36 dBu)
• Limit (red LED) Input clip, output limit
• Fault (red LED) Overheat, DC fault, over current, etc

System

• Inputs 1 x 3-pin 5.08 mm Euroblock connector
• 1 x RCA stereo summed
• Input impedance 10 kΩ unbalanced and RCA, 20 kΩ balanced
• Input sensitive Balanced: 1.23 V (+4 dBu)
• RCA: 0.62 V (-2 dBu) each for mono sum RCA
• Maximum input level 9.75 V (+22 dBu)
• Outputs 1 x 2-pin 5.08 mm Euroblock connector
• Output circuit type Class D
• Remote connector 1 x RJ45 connector

Performance

• Distortion, 1/8 rated power <0.05%
• Frequency response 20 Hz to 20 kHz, +0.5 / -1 dB
• Crosstalk (2 channel models) >85 dB
• Signal-to-noise >97 dBA
• High-pass filter 80 Hz HPF