MONITOR AUDIO MONITOR MRW-10 SUBWOOFER

Monitor MRW-10

The muscular Monitor MRW-10 powered subwoofer delivers a thunderous bass down to below 30 Hz and offers a totally immersive movie, music, or gaming experience.

The Monitor MRW-10’s rigid cabinet is made from 18 mm thick MDF and accommodates a 10" long-throw MMP II bass driver and a rear port that allows optimal output from the powerful on-board 100 W class D power amplifier.

The Monitor MRW-10 boasts an array of features dedicated to optimising a home theatre system. There are three pre-set EQ mode settings (Music, Movie, Impact) to offer a level of adjustment for all rooms and tastes, and the controls use an advanced DSP based architecture to provide the ultimate in audio flexibility.

Monitor MRW-10 Key Features

• 10" MMP II long throw subwoofer driver
• Rigid MDF cabinet with rear porting
• Powerful 100 W Class D power amplifier – high efficiency and punchy bass delivery
• Switch mode power supply, designed to deliver high continuous rating and provides the instantaneous delivery of high current when required
• DSP processing with all control features and crossover performed in the digital domain
• Three pre-set EQ mode settings. Music / Movie / Impact
• 12 V trigger – provides switching control from AV amp, processor, or home automation control system
• 18 mm thick MDF construction

Technical Specifications

System Format	Lower Frequency Limit	Upper Frequency Limit
Rear ported bass reflex cabinet	30 Hz (-6 dB)	Variable 50 – 120 Hz @ 24 dB/Octave
Amplifier Output	Amplifier Classification	Bass EQ Profiles
100 W RMS	Class D with Switch mode PSU	Music / Movie / Impact
Phase Control	Auto Sensing	Input Level Requirements
0 – 180°	>3.5 mV	Standby after approximately 15 minutes if no signal sensed
Drive Unit Complement	Input Impedance	Mains Input Voltage
1 x 10" MMP II long throw driver	>20 K ohms	110 – 120 Vac – 50 – 60 Hz 220 – 240 Vac – 50 – 60 Hz. Selectable
Fuse Specification	Connection	External Dimensions (Including Grille and Feet (H x W x D))
110 – 120 VAC – T4AL/250VAC	2 x Stereo RCA, 1 x LFE RCA connection	336 x 320 x 350.6 mm (131/4 x 125/8 x 1313/16")
220 – 240 VAC – T4AL/250VAC	12 V trigger (3.5 mm mono mini-jack)
Standby Power Consumption	Weight	Sold As
<0.5 W standby	10.54 kg (23 lb 4 oz)	Single Unit